CLASS B – 23 LITRE AUTOCLAVE WITH LCD SCREEN

 

VETPRO 23B

The VetPro 23B is a Class B autoclave, with 23 litre capacity. It features several default sterilisation cycles for different types of materials, a self-diagnosis system and USB connection.

Included with all our VetPro 23B Autoclaves is our bespoke developed rack which ensures you get maximum usable space of 20 Litres inside the 23 Litre chamber.

CHARACTERISTICS:

  • Automatic functioning with various default sterilization cycles
  • LCD screen with user-friendly interface that shows updated information during the sterilisation process
  • Built-in printer and USB connection for data exportation to a pen-drive (not included)
  • Self-diagnosis system for protection against over-heating or over-pressure

TECHNICAL DATA:

  • Quality Thomas Manufactured Vaccum Pump
  • Large LCD Screen
  • Water Quality Sensor
  • General size: 70 × 50 × 43 cm
  • Chamber size: Ø24.5 × 44 cm
  • Weight: 55 Kg
  • Input power: 220-230V, 50 Hz, 1500 VA
  • Sterilisation temperature: 121 ºC / 134 ºC
  • Operating temperature: 5 ºC / 40 ºC
  • Relative humidity: ≤80%
  • Water tank volume: 4 l

DIRECTIVES:

  • 93/42/EEC, Medical Device directive (class IIb)
    • EN 61010-1:2010: Safety requirements for electrical equipment for measurement, control and laboratory use — Part 1: General requirements
    • EN 61010-2-040:2015: Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    • EN 13060:2014: Small steam sterilisers
    • EN 61326-1:2013: Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements
    • EN 62304:2006/AC:2008: Medical device software – Software life-cycle processes
    • EN ISO17665-1:2006: Sterilization of health care products – Moist heat – Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
  • 2011/65/EU RoHS directive

INCLUDED ACCESSORIES:

  • (×3) Tray to place instruments
  • (×1) Base for trays
  • (×1) Handle for extracting the trays
  • (×1) Drainage hoses
  • (×2) Connector hose-drainpipe
  • Included with all our 23B Autoclaves is our bespoke developed rack which ensures you get maximum usable space of 20 Litres inside the 23 Litre chamber.
Programme Temperature Pressure Sterilization time Total time Type Max. load Max. load per tray
Solid 121 ºC 110 kPa 20 min 31 min Solid material
Unwrapped
7.5 Kg 2.5 Kg
134 ºC 210 kPa 4 min 19 min
Porous 121 ºC 110 kPa 20 min 41 min Solid/porous material
Unwrapped / simple wrap / double wrap
7.5 Kg 2.5 Kg
134 ºC 210 kPa 4 min 26 min
Hollow 121 ºC 110 kPa 20 min 41 min Solid/porous/hollow material
Unwrapped / simple wrap / double wrap
7.5 Kg 2.5 Kg
134 ºC 210 kPa 4 min 26 min
Prion 134  ºC 210 kPa 19 min 41 min Solid/porous/hollow material
Unwrapped / simple wrap / double wrap
7.5 Kg 2.5 Kg
B&D Test 134  ºC 210 kPa 4 min 21 min
Helix Test 134  ºC 210 kPa 3.5 min 21 min
Vacuum test -80 kPa 15 min
Dry test 10 min
Cleaning programme 105 ºC 20 kPa 5 min Solid/porous/hollow material
Unwrapped
7.5 Kg 2.5 Kg

*Types of materials Examples:
Solid: Tweezers, scissors, etc.
Porous: Textile products
Hollow: Type A and type B, such as cannulae, tubes, turbines, etc.

MILLPACK
Self-seal sterilization pouch with a sterility test strip

SS00520 90mmx 230mm Pack of 200
SS00525 135mmx 260mm Pack of 200
SS00530 135mmx 356mm Pack of 200
SS00545 190mmx 330mm Pack of 200
SS00555 305mmx 381mm Pack of 200

The only sterilisation pouch with the built-in sterility test strip!

100% RECYCLABLE

Millpack is made from paper and a proprietary blend of polypropylene which makes it fully recyclable!

FEATURES:

  • Wide range of pouch sizes – convenient to fit a wide selection of instruments
  • High grade medical paper backing – helps prevent strike-through!
  • Thumb notch for easy opening
  • labelling area for easy kit identification
  • Steam dot indicator 121oc 15min/134oc 3.5min ethylene oxide dot indicator (eo)
  • Heat-sealed upper corners helps prevent contaminants from entering the pouch along the opening seal
  • Conforms to ISO11140-1 | Class 6

 

Product Enquiry