Vet1 Vetflow Pro SP-50 Syringe Pump

See more information about the VetFlow Pro SP-50 here

Vet1 IV dual single/dual channel IV fluid warmer

Deliver heated IV fluids safely with precise pre-set temp ranges.

The Vet1 dual channel IV fluid warmer has been designed to warm 1 or 2 IV lines simultaneously,

Heat range settings.
L = Low (30-38 oC)
M = Medium (32-40 oC)
H = High (34-40 oC)

With built in overheat alarm, and key pad function for ease of use.

Is supplied with hanging clip for cage or IV pole mounting.
Power cord included.

See more about the Vet1 IV Fluid Warmer here

M800 VET – Handheld Veterinary Monitor

Physical Specifications
Mainframe weight: <400g (full configuration, including the batteries)
Mainframe size: 58.5mm(W)Å~123mm(H)Å~28mm(D)

Environmental Specifications
Temperature: Operating: 5℃ to +40℃
Storage: -20℃ to +55℃
Atmospheric: Operating: 860hPa to 1060hPa pressure

Storage: 500hPa to 1060hPa
Humidity: Operating: 15% to 85%(non condensing)
Storage: less than 93%(non condensing)

BLT SpO2
Measurement range: 0~100%
Resolution: 1%
Accuracy: 70~100%：± 2%
0% to 69%: unspecified
Refreshing rate: <13 seconds

Display
Size: 2.4 inch
Resolution: 320*240 pixels

Indicating Lamp
Alarm indicating 1(Yellow/Red), on the top of screen.
Battery charging indicating lamp: 1（orange）
When charged, it lights orange.
When fully charged or not charged, it doesn’t light.

Buttons
Quantity: 6
Functions: Power button, Up button, Down button, Left button, Right button, and Alarm pause button
Displaying way: Trend tabular
Trend interval: 2 seconds to 30 minutes
Trend parameter: HR, SpO2
Trend data: Spot-check: ID from 1 to 99, 300 groups can be stored for each ID.

See more about the M800 Vet Handheld Veterinary Monitor here

Vet1 10lpm Oxygen Concentrator with Dual Supply

See more information about the Vet1 Oxygen Concentrator here

Compact Suction Unit

• Ultimate negative pressure value: ≥0.075MPa
• Regulating scope of negative pressure : 0.02MPa ～ultimate negative pressure value
• Air exhausting speed: ≥11L/min\
• Reservoir: ≥1000mL,1pc
• Power supply: 220V
• Input power: 90VA 7. Noise: ≤65dB(A)
• Suction pump: piston pump
• The suction unit is not suitable to use on occasions with inflammable and explosive gas.
• Class of liquid-proof: IPX0
• Non AP or APG device
• No signal input or signal output
• Normal Working Condition Ambient temperature: 5℃-40℃
• Relative humidity: ≤80%\
• Atmospheric pressure: 86kPa-106kPa

See more about the Vet1 range of suction units here