Capable of most monopolar and bipolar surgical procedures and packed with dependable safety features, the V1-100V satisfies the veterinarian’s demands with precision, safety, and reliability.

Monopolar mode – Monopolar cutting

Monopolar cutting mode includes pure cut, blend 1, blend 2, blend 3. The output power can be adjustable.
Pure cut: cut the tissue cleanly and accurately without coagulation.
blend 1: Use when the cutting speed is slightly slow and a small amount of hemostasis is required.
blend 2: Compared with blend 1, it is used when the cutting speed is slightly slower and the better hemostatic effect is needed.

Monopolar modes – Monopolar coagulation

Monopolar coagulation mode includes spray coagulation, forced coagulation, and the output power is adjustable.

Forced coagulation: It’s non-contact coagulation. The output threshold voltage is lower than spray coagulation.
It’s suitable for coagulation in a small area.

Pray coagulation: high-efficiency coagulation without contact surface. The coagulation depth is shallow.
The tissue is removed by evaporation. It usually use a Blade or ball electrode for coagulation.

Bipolar mode

The bipolar mode includes only standard mode. The output power is adjustable.

Standard mode: It’s suitable for most bipolar applications. Keep the low voltage to prevent sparks.

A new generation of intelligent tissue density immediate feedback technology
The device uses a new generation of intelligent tissue density immediate feedback technology. According to the different impedance of the tissue, the output is intelligently controlled to achieve the effect of minimally invasive tissue cutting, ensuring the output of ideal power, and reducing the thermal damage of the cut tissue.

Functional self-test
After each turn-on, the high-frequency electrosurgical unit will immediately execute a self-test procedure. Once the internal abnormality of the system is found and the self-test fails, the current output will be automatically cut off immediately. This ensures that the ES-100V generator is always in good working condition and performance. During the self-test, it is also tested whether the connected accessories are functioning normally.

Product Specifications

Each V1-100V Unit comes with a starter kit including:

1x Foot Switch
1x Disposable Handswitch Pencil
1x Patient Matt with cable (reusable)
1x Reusable bipolar forceps with cable
1x Power Cord
1x Instruction Manual
2 x Spare Fuse

Accessories

V100205
Electro Surgical S Pencil

Suitable for use with most major brands with valleylab style connector cautery cutting blade.

Can be sterilised for up to 100 uses.

V1F4243

Electro Surgical Pencil $108.70

Suitable for use with most major brands with valleylab style connector cautery cutting blade with hand switches. Cord length 3M.

Can be sterilised for up to 100 uses.

V1F4797

Disposible Electro Surgical Pencil $5.70

Suitable for use with most major brands with valleylab sytle connector Disposable handle with finger switches and 3.2M cord length.

V100201.02
Pencil handpiece for microsurgical needles

Can be sterilised for up to 100 uses.

V1500500.L11

Electro Surgical Micro Needles

For use with Pencil handpiece

V100500.00
Electro Surgical Electrodes

10-peice kit 5cm length

Can be sterilised for up to 100 uses.

V1-152-150
Ball Electrode

Length 6cm Ball diameter 4mm

Can be sterilised for up to 100 uses.